SupaPore TTE
Dimensions
- Outside Diameter: 70mm
- Typical Surface Area: 0.63m² (Per 10”)
- Length: See ordering guide
Maximum Operating Conditions
- Temperature: 150ºC
Sterilisation and Sanitisation
- Steam or Autoclave: 142ºC for 30 mins (up to 30 cycles)
- During Steam in place (SIP), the differential pressure across the cartridge should not exceed 0.30 bar at 142ºC
Recommended Maximum Differential Pressure:
- Forward Flow:
- 5.5 Bar @ 24ºC
- 3.8 Bar @ 75ºC
- 2.0 Bar @ 125ºC
- 1.0 Bar @ 150ºC
- Reverse Flow:
- 3.4 Bar @ 24ºC
- Recommended change-out differential pressure: 2.5 Bar
The operating conditions above should be treated as maximum differential pressures for short-term use without causing cartridge collapse problems.
Product validation guide available on request. All SupaPore TTE cartridges are manufactured under strict control with batch number identification, giving full traceability on all components.
Standard Materials of Construction
- Filter Media: Polytetrafluoroethylene (PTFE)
- Media support: PTFE
- End Caps: PFA
- Cage/Core: PFA
Technical Specifications
- Full Fluoropolymer construction
- Validated* removal ratings for consistent and reliable performance
- Capable of high temperature operation for extended periods
- High chemical resistance to most oxidising agents, solvents, acids, and alkalis
- Identification mark on every cartridge
- Full product guide available
*See product validation guide for further details stating test method and rated efficiencies
Features and Benefits
- Food and Beverage: Ozonated water
- Pharmaceutical: Sterile filtration of APIs and final solutions
- Fine Chemicals: Solvents, chemicals, high temperature air/gas
- Electronics: Ultrapure water, photolithography chemicals
